V-belt Stark SPB 2530
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →GATES and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPB 2530 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2530 and any equivalents.
The Stark SPB 2530 is a narrow wedge V-belt with an SPB profile and a 2530 mm length. It measures 16.3 mm across the top, 13 mm in height and has a 40° angle. Use these dimensions to match it to the belt you are replacing.
Start by reading the marking on the back of the old belt. If it shows SPB 2530, this belt matches that profile and length. If the marking is worn, measure the top width and height with a caliper and confirm the length along the belt's reference line. The SPB profile is 16.3 mm wide and 13 mm high, so a belt with different dimensions is not the same profile.
The same size is also listed under Mitsuboshi SPB 2530, Optibelt SPB 2530 and Gates SPB 2530. If your drive uses more than one belt, replace all belts in the set at the same time so the load stays shared evenly across the grooves.
Send the part number, the belt marking or your measurements by WhatsApp or email and we will confirm the right belt or suggest an equivalent. Photos of the old belt and the drive pulley grooves help us verify the profile and length before you order.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt for SPB 2530. If it is unreadable, measure the top width (16.3 mm), height (13 mm) and the length along the belt's reference line (2530 mm).
- Can I replace just one belt on a multi-belt drive?
- Replace all belts in the set at the same time. Mixing a new belt with worn belts can cause uneven loading and premature failure.
- What should I send to get a quote?
- Send the part number Stark SPB 2530, or the marking from your old belt, plus the quantity you need. Photos of the belt and pulley grooves help us confirm the profile and length.