V-belt Stark SPB 1950
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPB 1950 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 1950 and any equivalents.
The Stark SPB 1950 is a narrow wedge V-belt with an SPB profile. Its top width is 16.3 mm, height is 13 mm, and included angle is 40 degrees. Use the marking on the old belt to confirm this is the size you need.
When reading the marking on the back of the belt, look for the profile and length. The SPB 1950 marking indicates an SPB profile and a 1950 mm length. Check that the belt you remove shows SPB 1950. If the marking is worn or missing, measure the top width and height to confirm the profile, and verify the length.
The same size is also listed under Optibelt SPB 1950. If you are replacing a belt on a drive that uses multiple belts, inspect all belts in the set for wear, cracking, or glazing. Replacing the full set helps maintain consistent tension and load sharing.
To request a quote, send the part number SPB 1950 by WhatsApp or email. Our team can confirm the belt or suggest an equivalent. For drive inspection, check sheave wear and alignment before installing a new belt.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I confirm the Stark SPB 1950 is the right belt?
- Read the marking on the back of your old belt. If it shows SPB 1950, this belt matches that profile and length. You can also measure the top width (16.3 mm) and height (13 mm) to verify the SPB profile.
- Can I use this belt to replace another brand?
- The same size is also listed under Optibelt SPB 1950. If your old belt shows that marking, the Stark SPB 1950 is the same size.
- What information should I send to request a quote?
- Send the part number SPB 1950 and the quantity you need by WhatsApp or email. If you have the old belt, include a photo of the back marking to help us confirm.