V-belt Stark SPA 2900
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPA 2900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2900 and any equivalents.
The Stark SPA 2900 is a narrow wedge V-belt with an SPA profile. It is identified by its SPA profile, 12.7 mm top width, 10 mm height and 40° angle. Use these dimensions to match it to the belt you are replacing.
When matching the belt on the drive, confirm the profile marking on the old belt and measure the top width and height. This belt has a 12.7 mm top width, 10 mm height and 40° angle, which correspond to the SPA profile. If the old belt is worn or the marking is unreadable, compare these dimensions with the belt you need to replace.
The part number Stark SPA 2900 identifies the profile and the length. The profile is SPA and the length is 2900 mm. Check that the replacement belt matches both the profile and the length before installation. If you need help confirming the right belt or a possible equivalent, send the part number and any photos of the old belt to our team via WhatsApp or email.
Dimensions
- Section
- SPA
Frequently asked questions
- How do I match the Stark SPA 2900 to the belt being replaced?
- Check the profile marking on the old belt and measure its top width and height. The SPA 2900 has a 12.7 mm top width, 10 mm height and 40° angle, and its length is 2900 mm. If these match your old belt, it is the correct replacement.
- What should I send to request a quote for the Stark SPA 2900?
- Send the part number Stark SPA 2900 via WhatsApp or email. If you are replacing an existing belt, include the profile and length from the old belt or a clear photo of its markings so we can confirm it.
- Can you help if the old belt marking is unreadable?
- Yes. Send the drive details and any measurements you can take from the old belt. We will use the SPA profile, 12.7 mm top width, 10 mm height, 40° angle and 2900 mm length to help identify a suitable replacement.