V-belt Stark SPA 1060
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPA 1060 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 1060 and any equivalents.
The Stark SPA 1060 is a narrow wedge V-belt for industrial drives. To match it to the belt you are replacing, compare the profile marking and the length on the back of the old belt.
This belt has an SPA profile with a 12.7 mm top width, 10 mm height and a 40° angle. The length is 1060 mm. These are the values to check against the marking on the belt you are removing.
If the old belt is worn or the marking is unreadable, measure the top width and the outside length, or send a photo of the belt and the drive. The same size is also listed under Optibelt SPA 1060.
The Stark SPA 1060 is a narrow wedge V-belt, not a classic V-belt. Confirm that the drive uses an SPA profile before ordering, since the groove angle and width must match the pulley.
Dimensions
- Section
- SPA
Frequently asked questions
- How do I confirm the Stark SPA 1060 is the right belt?
- Check the marking on the back of the belt you are replacing. It should show the SPA profile and the length. If it does, this belt matches those values.
- What if the marking on my old belt is gone?
- Measure the top width and the outside length of the old belt. The Stark SPA 1060 has a 12.7 mm top width and a 1060 mm length.
- Can I use this belt in place of a classic V-belt?
- No. The Stark SPA 1060 is a narrow wedge V-belt with an SPA profile. The pulley groove must match the SPA profile and the 40° angle.