Poly-V belt Stark PK 1530
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- Poly-V belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK PK 1530 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PK 1530 and any equivalents.
This is a Stark PK 1530 Poly-V belt, also called a multi-rib or serpentine belt. It is used where a single belt has to drive several accessories from one pulley set, such as an alternator, water pump or compressor. To confirm the fit, match the PK profile and the 1530 mm length to the marking on the belt you are replacing.
The PK profile is a multi-rib cross-section, and 1530 mm is the length. Both must match the belt on the drive. The easiest way to check is to read the marking printed on the back of the old belt: the profile letters and the length number are usually right there. If the old belt is worn, glazed, cracked or missing ribs, or if the marking is no longer readable, measure the length along the belt and count the ribs before ordering.
Poly-V belts are commonly used on drives that need a thin, flexible belt with good grip across a wide pulley face. Before fitting a new belt, inspect the pulleys for wear, rust or debris, check that the tensioner moves freely and turns smoothly, and make sure all pulleys are aligned. A worn tensioner or a misaligned pulley will shorten the life of any new belt.
If you are replacing more than one belt on the same drive, or if the drive uses matched belts, replace them as a set. Send us the part number PK 1530, or a photo of the marking on the old belt, by WhatsApp or email. Our team will confirm the Stark PK 1530 or suggest an equivalent.
Dimensions
- Profile
- PK
Frequently asked questions
- How do I confirm that the Stark PK 1530 is the right belt for my drive?
- Check the marking on the back of the old belt. It should show the PK profile and the 1530 mm length. Also compare the number of ribs and the overall length. If you are unsure, send us a photo of the old belt marking.
- What should I inspect before installing a new Poly-V belt?
- Look at the pulleys for wear, rust or debris, check the tensioner for smooth movement, and confirm that all pulleys are aligned. Correct alignment and tension are important for belt life.
- Can you help if I cannot read the part number on my old belt?
- Yes. Send us the dimensions you can measure, the profile if visible, and a photo of the belt and pulleys. We will help identify the correct Stark PK 1530 or an equivalent.