Poly-V belt Stark PK 1200
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- Poly-V belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
OPTIBELT and STARK: matching part numbers →GATES and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK PK 1200 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PK 1200 and any equivalents.
The Stark PK 1200 is a Poly-V (multi-rib) belt in the PK profile with a length of 1200 mm. Before you fit it, take a few minutes on the drive itself so the new belt starts clean and runs true. The same size is also listed under Optibelt PK 1200 and Gates PK 1200.
Inspect the sheaves first. Look for worn or hooked grooves, a polished or glazed groove face, and any burr or rust that will shave the ribs. Check that each sheave runs true and that the grooves are free of buildup and debris. A sheave that has worn out of shape will wear a new multi-rib belt quickly, no matter how well the belt is made.
Then check the rest of the drive. Confirm the shafts are parallel and the sheaves are aligned, since misalignment pulls the ribs to one side and loads the edge. Spin the pulleys by hand and feel the bearings; roughness or play points to a bearing that should be dealt with before the belt goes on. Check the tensioner for free travel and a smooth spring action.
When you are ready to order, send the part number Stark PK 1200, the profile PK, and the length 1200 mm by WhatsApp or email. If you are replacing more than one belt on the same drive, send the quantity and the belt markings from the old parts so the team can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- PK
Frequently asked questions
- What do I need to send for a quote on this belt?
- Send the part number Stark PK 1200, along with the profile PK and the length 1200 mm. If you have the old belt, the marking on the back is the quickest way to confirm it.
- Which sheave problems should I fix before fitting a new belt?
- Worn or hooked grooves, glazed groove faces, burrs, rust, misalignment between sheaves, and rough or loose bearings. Any of these will shorten the life of a new Poly-V belt.
- Is this size listed under other brands?
- Yes. The same size is also listed under Optibelt PK 1200 and Gates PK 1200.