V-belt Stark CX 59
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK CX 59 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CX 59 and any equivalents.
The Stark CX 59 is a cogged classical V-belt with a CX profile. Before you fit this belt, inspect the drive and sheaves, because worn grooves or misalignment will shorten the life of any new belt.
Start with the sheaves. Check the groove flanks for wear, scoring or a polished step where the belt has been running. A worn groove lets the belt sit too deep, so it slips and overheats even when the tension is correct. Look for cracks, chipped edges or a ridge at the bottom of the groove. If the sheaves are worn, replacing the belt alone will not restore the drive.
Check alignment and the rest of the drive. Use a straightedge across the sheaves to confirm they line up, and look for oil, grease or debris that will attack the belt. Spin the driven equipment by hand and feel for bearing play, binding or a pulley that runs out of true. Correct these faults before the Stark CX 59 goes on.
When you are ready to order, send the part number CX 59 by WhatsApp or email. If you are unsure the cogged classical V-belt is the right fit for the drive, include the belt marking and the sheave dimensions in your message and the team will help confirm the right belt.
Dimensions
- Section
- CX
Frequently asked questions
- What does the CX profile mean on this belt?
- The profile is CX. The belt is a cogged classical V-belt, and the CX profile identifies its cross-section. Use the profile and part number together when you request a quote.
- Why check the sheaves before fitting the Stark CX 59?
- Worn or misaligned sheaves cause slip, heat and edge wear. A new belt on a worn drive will not run correctly, so inspect and correct the sheaves first.
- How do I request a quote for the Stark CX 59?
- Send the part number CX 59 by WhatsApp or email. If you need help confirming the right belt, include the marking on the old belt and the sheave dimensions.