V-belt Stark C 94
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK C 94 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 94 and any equivalents.
The Stark C 94 is a classical V-belt with a C profile. It measures 22 mm across the top, 14 mm high, and has a 40° angle. If you are replacing a belt, the marking on the back is your starting point for a correct match.
Read the old belt before you order. Look for the code C 94 along with the profile and any other numbers printed on the back. Confirm those markings against this page: profile C, top width 22 mm, height 14 mm, angle 40°. A clear photo of the marking helps us verify the belt you need.
The same size is also listed under Optibelt C 94. If your drive uses more than one belt, replace the full set at the same time so the load stays even across the grooves. Inspect the sheaves for wear, oil, or debris while the belts are off.
Send the part number C 94 by WhatsApp or email to request a quote. Include the quantity and the marking from your old belt if you have it. Our team can confirm the Stark C 94 or help you find the right belt for the drive.
Dimensions
- Section
- C
Frequently asked questions
- How do I identify a Stark C 94 belt on the machine?
- Check the marking printed on the back of the belt. The code C 94, along with the profile, is the reference you need. You can also measure the top width and height: 22 mm and 14 mm for this belt.
- Can I replace just one belt in a multi-belt drive?
- It is good practice to replace all belts in the set at the same time. This keeps tension and load consistent across the grooves and helps avoid uneven wear.
- What information should I send with my quote request?
- Send the part number C 94 and the quantity you need. If you have the old belt, include the marking from the back or a photo of it so we can confirm the match.