V-belt Stark C 56
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK C 56 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 56 and any equivalents.
When a drive belt needs replacement, the first step is reading the old belt. The Stark C 56 is a classical V-belt with a C profile. This page gives you the key dimensions so you can confirm it matches your drive before requesting a quote.
The marking on the back of a belt often includes the part number and profile. For the Stark C 56, the profile is C, with a top width of 22 mm and a height of 14 mm. The angle is 40°. These measurements help you verify that the belt will sit correctly in the pulley grooves. If the old belt is worn or the marking is unreadable, measure the top width and height with a caliper and compare to these values.
The Stark C 56 is a classical V-belt, not a narrow wedge or cogged design. It is used in industrial drives where a standard C-section belt is specified. When ordering, provide the part number C 56 and the profile C. If you need help confirming the right belt or an equivalent, send a photo of the old belt and the drive setup via WhatsApp or email. Our team can assist with identification.
Dimensions
- Section
- C
Frequently asked questions
- What are the dimensions of the Stark C 56 belt?
- The Stark C 56 has a C profile with a top width of 22 mm, a height of 14 mm, and a 40° angle.
- How do I confirm the Stark C 56 is the correct replacement?
- Check the marking on your old belt for the part number and profile. If it reads C 56, it matches. You can also measure the top width and height and compare to 22 mm and 14 mm.
- What information should I send to request a quote?
- Send the part number C 56 and the profile C. If you are unsure, include a photo of the old belt and the pulley grooves so we can help verify.