V-belt Stark C 266
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK C 266 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 266 and any equivalents.
The Stark C 266 is a classical V-belt with a C profile, a 22 mm top width, a 14 mm height and a 40-degree angle. If you are replacing a belt on an existing drive, the marking on the old belt is the fastest way to confirm the match. Send us the part number and any details from the old belt to request a quote.
To match this belt to the one being replaced, start with the profile and the part number. The C profile is a classical V-belt cross-section, and the 22 mm top width and 14 mm height are the dimensions to compare against the old belt. The 40-degree angle is the included angle of the belt cross-section, so a belt with the same profile and dimensions will sit correctly in the pulley groove. If the old belt is worn or the marking is unreadable, measure the top width and height with a caliper and note the part number from the back of the belt.
The Stark C 266 is identified by its part number, which is the reference to use when you request a quote. We carry this belt and can help confirm it is the right one for your drive. If you need to verify the replacement, send a photo of the old belt marking along with the drive details, and our team will check the profile and dimensions. For drives that use multiple belts, it is good practice to replace the full set at the same time so the belts share the load evenly.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm the Stark C 266 is the right replacement?
- Check the marking on the back of the old belt for the part number and profile. The Stark C 266 has a C profile, a 22 mm top width, a 14 mm height and a 40-degree angle. If those match the old belt and the pulley groove, it is the correct cross-section.
- What should I send to request a quote for this belt?
- Send the part number C 266 and the brand Stark, along with any details from the old belt such as the profile or dimensions. If you have a photo of the old belt marking, include that as well. Our team will reply promptly with a quote.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, it is common practice to replace all belts in the set at the same time. This helps keep the load evenly distributed across the belts and avoids mixing new and worn belts. The Stark C 266 can be ordered in the quantity you need.