V-belt Stark C 192
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK C 192 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 192 and any equivalents.
The Stark C 192 is a classical V-belt with a C profile. It measures 22 mm across the top, 14 mm high, and has a 40° angle. This page is set up to help you match it to the belt you are replacing.
The simplest way to confirm a match is to read the marking on the back of the old belt. If it shows C 192, this is the same size. Check the profile against the pulley groove as well: a C profile belt is 22 mm wide at the top and 14 mm high, with a 40° angle. A belt that sits too high or too low in the groove is the wrong profile, even if the length looks close.
The same size is also listed under Mitsuboshi C 192, so you may see that marking on a belt already in service. Compare the full marking and the dimensions before ordering. If the old belt is worn, cracked, glazed or sitting lower in the groove than a new one, replace it rather than matching by appearance alone.
For a quote, send the part number C 192 and the quantity you need. If you are unsure of the profile, include the top width and height you measure on the old belt, plus a photo of the back marking. We carry the Stark C 192 and can confirm it against your drive.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm the Stark C 192 is the right belt?
- Read the marking on the back of the belt being replaced. If it reads C 192, the part number matches. Then check the profile: this belt is 22 mm at the top, 14 mm high, with a 40° angle.
- What should I send to request a quote?
- Send the part number C 192 and the quantity. If you are unsure of the profile, include the top width and height measured on the old belt and a photo of the back marking.
- Can I replace just one belt on a multi-belt drive?
- On a drive with more than one belt, replacing the full set keeps the load even across the grooves. If you send the number of belts on the drive, we can quote the set.