V-belt Stark C 147
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK C 147 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 147 and any equivalents.
Replacing a worn classical V-belt starts with reading the old belt. This Stark C 147 is a C-profile belt with a 22 mm top width, 14 mm height and 40° angle. Confirm the marking on the back of the belt before you order.
The C profile is a classical V-belt section. Check that the belt you are removing carries the same C section and the same length designation, 147. If the old belt is worn, frayed or stretched, clean a short section of the back and read the printed code rather than measuring the outside length.
The same size is also listed under Mitsuboshi C 147 and Optibelt C 147, so you can compare what is already on the drive or in stores. For a quote, send the part number C 147, the quantity, and a photo of the belt marking if it is faded.
Inspect the sheaves while the belt is off. Look for worn grooves, oil or debris, and check that the drive is aligned. Where a drive runs more than one belt, replace the full set at the same time so the load stays even across the belts.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm this is the right belt?
- Read the marking on the back of the belt you are replacing. It should show the C section and the 147 length designation. If the marking is unreadable, send us a photo and the drive details.
- What are the dimensions of this belt?
- It is a C-profile classical V-belt with a 22 mm top width, 14 mm height and 40° angle.
- How do I request a quote?
- Send the part number C 147, the quantity you need, and any belt marking photo by WhatsApp or email. We will confirm the belt or suggest an equivalent.