V-belt Stark C 108
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK C 108 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 108 and any equivalents.
The Stark C 108 is a classical V-belt with a C profile. Its 22 mm top width, 14 mm height and 40° angle identify the cross-section, while the C 108 marking gives you the profile and belt number to match against your drive.
When you read a belt marking, the profile letter and the number that follows are the two pieces of information that let you match a replacement to the drive. On this Stark belt, the C profile corresponds to a 22 mm top width and 14 mm height, with a 40° angle. The C 108 designation is the reference to compare with the belt you are replacing.
The same size is also listed under Optibelt C 108. If your maintenance records, spare-parts list or the old belt itself points to that size, this Stark belt is the same cross-section and length reference. Confirm the marking on the back of the belt before ordering, especially where several drives use similar profiles.
To request a quote, send the part number Stark C 108, the quantity you need and any marking from the old belt. If you are unsure whether this is the correct belt for the drive, include a photo of the belt and the pulley groove. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
Frequently asked questions
- What do the profile and length tell me on a Stark C 108?
- The C profile sets the cross-section: 22 mm top width, 14 mm height and a 40° angle. The C 108 marking is the reference you match against the belt on your drive.
- How do I confirm the Stark C 108 is the belt I need?
- Check the marking on the back of the old belt and compare it with C 108. You can also send a photo of the belt and pulley groove with your quote request.
- What should I send to request a quote?
- Send the part number Stark C 108, the quantity required and any marking from the old belt. If you need help identifying the correct belt, include a photo of the drive.