V-belt Stark BX 69
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and STARK: matching part numbers →GATES and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK BX 69 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 69 and any equivalents.
The Stark BX 69 is a cogged classical V-belt with a BX profile. It is used on industrial drives where a classical V-belt cross-section is required and the cogged construction suits smaller pulleys. Confirm fit by matching the BX profile and the belt marking to your drive.
Cogged classical V-belts are common on fans, pumps, compressors, and other industrial equipment that run standard V-belt drives. The cogged design allows the belt to bend more easily around smaller pulleys, which can help where a standard wrapped belt would run hot or slip. The BX profile is a classical cross-section, so check that your pulleys are cut for BX and not for a narrow wedge or a different section.
To confirm the right belt, read the marking on the back of the old belt. If it shows BX 69, this Stark belt matches that profile and size. The same size is also listed under Dayco BX 69 and Gates BX 69, so you can compare markings if the old belt is from another brand. If the marking is worn or missing, measure the top width and the outside length, or send a photo of the belt and the pulley groove to our team.
When you request a quote, include the part number BX 69 and the quantity you need. If you are replacing a set of belts on a multi-belt drive, let us know how many are on the drive so we can help you match the set. Our team can confirm the profile and help you avoid a mismatch before you order.
Dimensions
- Section
- BX
Frequently asked questions
- How do I confirm that the Stark BX 69 fits my drive?
- Check the marking on the back of your old belt. If it reads BX 69, this belt matches that profile and size. You can also measure the top width and outside length, or send a photo of the belt and pulley groove for confirmation.
- Can I mix the Stark BX 69 with other brands on the same drive?
- For multi-belt drives, it is best to replace the full set at the same time so the belts share the load evenly. The same size is also listed under Dayco BX 69 and Gates BX 69, but we recommend matching the set rather than mixing brands.
- What information should I send with my quote request?
- Send the part number BX 69, the quantity, and the number of belts on the drive if it is a set. If you are unsure of the profile, include the old belt marking or a photo of the belt and pulley.