V-belt Stark BX 36
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK BX 36 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 36 and any equivalents.
This Stark BX 36 is a cogged classical V-belt with a BX profile. The BX profile identifies a raw-edge, cogged construction in the classical B-section width, and the 36 indicates the belt's length. Use both the profile and the length when comparing this belt to what is on your drive.
The BX profile is a classical V-belt cross-section with a cogged underside. Cogged classical belts are commonly used where a standard wrapped classical belt runs on smaller pulleys or where some additional flexibility is useful. The BX section is distinct from a narrow V-belt or wedge belt, so confirm the sheave groove matches the BX cross-section before ordering.
The 36 in the part number gives the length for this belt. When you match a replacement, check the profile and the length against the belt you are removing. If the old belt is worn or the marking is hard to read, measure the outside length and compare it with the BX 36 specification.
The same size is also listed under Mitsuboshi BX 36, Optibelt BX 36, and Dayco BX 36. If you are cross-referencing a belt on an existing drive, those brand listings can help confirm that the BX 36 size is the one you need. Send us the part number from the back of the belt if you want us to confirm the profile and length.
Dimensions
- Section
- BX
Frequently asked questions
- What do the BX and 36 mean on this Stark belt?
- BX is the profile: a classical V-belt cross-section with a cogged construction. The 36 indicates the belt length. Both the profile and the length need to match the drive.
- Can I replace a Mitsuboshi, Optibelt, or Dayco BX 36 with this Stark belt?
- The same size is also listed under Mitsuboshi BX 36, Optibelt BX 36, and Dayco BX 36, so this Stark BX 36 is the same profile and length. Confirm the sheave groove and the belt marking before installing.
- What should I send to get a quote for this belt?
- Send the part number BX 36 and the quantity you need by WhatsApp or email. If you are not sure of the profile or length, send a photo of the marking on the back of the old belt and we can help confirm it.