V-belt Stark B 136
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK B 136 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 136 and any equivalents.
The Stark B 136 is a classical V-belt in the B profile, measuring 17 mm across the top, 11 mm high and molded at a 40° angle. If you are replacing a belt on an existing drive, match the profile and length on the old belt before ordering. This page gives you the markings to check and what to send for a quote.
Start with the belt you are removing. Read the marking on the back: it should show the B profile and the length designation. Compare that to the Stark B 136, and check the top width and height against the worn belt with a caliper. A B profile belt that has been running in a worn sheave can look narrower than 17 mm, so measure a clean section if possible.
The same size is also listed under Optibelt B 136, which is useful when you are cross-checking a shelf or a drive that carries more than one brand. Confirm the sheave groove is a B section and that the belt sits correctly in the groove, not riding on the bottom. If the drive runs multiple belts, replace the set together so the load stays even.
For a quote, send the part number Stark B 136, the quantity, and a photo of the marking on the old belt if it is still readable. If the number is worn off, send the profile, the measured top width and height, and the length from the old belt. Our team replies by WhatsApp or email and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
Frequently asked questions
- How do I confirm the Stark B 136 matches the belt I am replacing?
- Check the marking on the back of the old belt for the B profile and the length designation. The Stark B 136 has a 17 mm top width, 11 mm height and a 40° angle, so measure those on the old belt if the marking is unreadable.
- What should I send to request a quote for this belt?
- Send the part number Stark B 136, the quantity you need, and a photo of the old belt marking if it is still legible. If the marking is gone, include the profile and the measured top width, height and length.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Optibelt B 136, so you can use that as a cross-check when comparing belts on the drive or in stores.