V-belt Stark B 130
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK B 130 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 130 and any equivalents.
The Stark B 130 is a classical V-belt with a B profile, a 17 mm top width, an 11 mm height and a 40° angle. It is a direct replacement for a worn B-section belt on industrial drives. The same size is also listed under Mitsuboshi B 130 and Optibelt B 130.
Before you fit a new belt, inspect the drive. Check the sheave grooves for wear, rust or embedded debris. Worn grooves let the belt sit too deep, so it slips and wears out early. Confirm the sheaves are aligned and the belt tension is set to the drive manufacturer's specification.
If the old belt is stretched, glazed or cracked, match it by the marking on the back. The Stark B 130 carries a B profile with a 17 mm top width, 11 mm height and 40° angle. When a drive uses multiple belts, replace the full set so all belts share the load evenly.
For a quote, send the part number, the quantity and the drive details by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
Frequently asked questions
- What are the dimensions of the Stark B 130?
- It has a B profile, a 17 mm top width, an 11 mm height and a 40° angle.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Mitsuboshi B 130 and Optibelt B 130.
- What should I check before fitting this belt?
- Inspect the sheave grooves for wear, rust or debris, confirm alignment and set tension to the drive manufacturer's specification.