V-belt Stark B 106
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK B 106 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 106 and any equivalents.
The Stark B 106 is a classical V-belt with a B profile, a 17 mm top width, an 11 mm height and a 40° angle. If you are replacing a belt on an existing drive, this page gives you the dimensions to compare against the belt you are removing.
Start by reading the marking on the back of the old belt. A B-section belt that matches this one carries the same profile and the same length designation, so the B 106 marking is your first check. Then measure the top width and the height of the old belt with a caliper; this belt is 17 mm across the top and 11 mm tall, with a 40° angle. If those numbers line up, the profile is correct.
The same size is also listed under Mitsuboshi B 106 and Optibelt B 106 if you are comparing what is already on the shelf or in your maintenance records. For a quote, send the part number B 106, the quantity you need, and a photo of the old belt marking if you have one.
If the old belt is worn, glazed or stretched, confirm the drive is not misaligned before you install a replacement. A belt that sits correctly in the groove and matches the original profile and length is the right starting point.
Dimensions
- Section
- B
Frequently asked questions
- How do I confirm the Stark B 106 matches the belt I am replacing?
- Check the marking on the back of the old belt for the B profile and the 106 length designation, then measure the top width and height. This belt has a 17 mm top width, an 11 mm height and a 40° angle.
- What information should I send to request a quote?
- Send the part number B 106, the quantity you need, and any marking from the old belt. If you are unsure, a photo of the old belt helps us confirm the profile and length.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Mitsuboshi B 106 and Optibelt B 106.