V-belt Stark A 99
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK A 99 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 99 and any equivalents.
The Stark A 99 is a classical V-belt with an A profile. It measures 13 mm across the top, 8 mm high and has a 40° angle. Before you fit it, inspect the drive and sheaves.
A worn belt often goes hand in hand with worn sheaves. Check the groove flanks for ridges, steps or polish. If the sheaves are worn, a new belt will not sit correctly or transmit load as intended. Correct any misalignment between shafts and make sure the sheaves are clean and free of rust or debris.
When you are ready to install the Stark A 99, loosen the driven equipment and adjust the center distance so the belt can be fitted without forcing it over the sheave flanges. Never pry or roll a belt into a groove. Tension the drive according to the equipment manufacturer's specification, then run it under load and recheck tension after the first few hours.
The same size is also listed under Gates A 99 and Optibelt A 99. To request a quote, send the part number A 99, the quantity you need and any drive details you have. If you are unsure whether this is the right belt for your application, send a photo of the old belt and the sheave markings, and our team will help confirm the profile and length.
Dimensions
- Section
- A
Frequently asked questions
- What are the dimensions of the Stark A 99?
- The Stark A 99 has an A profile with a 13 mm top width, an 8 mm height and a 40° angle.
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, ridges or steps, verify that the sheaves are clean and check shaft alignment. Worn or misaligned sheaves will shorten belt life and reduce performance.
- How do I request a quote for the Stark A 99?
- Send the part number A 99, the quantity required and any drive details by WhatsApp or email. If you need help confirming the right belt, include a photo of the old belt and the sheave markings.