V-belt Stark A 28
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and STARK: matching part numbers →GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK A 28 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 28 and any equivalents.
The Stark A 28 is a classical V-belt with an A profile. Its 13 mm top width, 8 mm height and 40° angle identify the cross-section; the part number gives the belt size. Use these dimensions to match an existing drive belt before you request a quote.
When reading a belt marking, the profile and the size code are the two details that determine fit. The A profile here is a classical cross-section, not a narrow wedge belt. The 13 mm top width and 8 mm height define how the belt sits in the pulley groove. The 40° angle is the included angle of the belt sides.
The same size is also listed under Mitsuboshi A 28 and Optibelt A 28. If you are replacing a belt and the old marking is worn, confirm the profile and the size code rather than relying on a partial number. A classical V-belt with the wrong cross-section will not seat correctly, even if the length appears close.
Dimensions
- Section
- A
Frequently asked questions
- What does the A profile mean on this Stark A 28 belt?
- It is a classical V-belt cross-section with a 13 mm top width, 8 mm height and 40° angle. This differs from a narrow V-belt or wedge belt profile.
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt for the A profile and the size code. If it is unreadable, measure the top width and height and compare them with the 13 mm and 8 mm dimensions.
- What should I send to request a quote?
- Send the part number Stark A 28, or the profile and size code from your old belt. If you have the old belt, include a photo of the back marking and the pulley groove.