V-belt Stark A 19
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK A 19 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 19 and any equivalents.
The Stark A 19 is a classical V-belt with an A profile. To replace a belt correctly, match the profile and the part number on the belt you are removing. This page gives you the key dimensions to confirm before you request a quote.
The A profile is a classical V-belt section. This belt has a top width of 13 mm, a height of 8 mm and a 40° angle. These figures let you check the belt against the one on the drive. If the old belt is worn or the marking is hard to read, measure the top width and height and compare them with these values.
The same size is also listed under Optibelt A 19. If you are replacing a belt that carries that reference, this Stark belt is the same size. When you send your request, include the part number A 19 and the profile so we can confirm the right belt for your drive.
For a quote, send the part number A 19, the profile A and the dimensions you measured. A photo of the marking on the back of the old belt also helps. If you need more than one belt for a drive, state the quantity so we can help you replace the set.
Dimensions
- Section
- A
Frequently asked questions
- How do I match the Stark A 19 to the belt I am replacing?
- Check the profile and the part number on the old belt. The Stark A 19 is an A profile classical V-belt with a 13 mm top width, 8 mm height and 40° angle. If those dimensions match your old belt, it is the same size.
- What should I send to request a quote for the A 19?
- Send the part number A 19, the profile A and the dimensions you measured. A photo of the marking on the back of the old belt helps us confirm the right belt.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Optibelt A 19. If your old belt carries that reference, this Stark belt is the same size.