Timing belt Stark 960-8M-10
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 960-8M-10 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 960-8M-10 and any equivalents.
The Stark 960-8M-10 is a timing belt with an HTD 8M profile and an 8 mm pitch. Before you fit it, take a few minutes to check the drive and the sheaves. That step helps you catch wear or misalignment that could shorten the life of the new belt.
Inspect each sheave for worn grooves, burrs, or debris. Check that the sheaves are aligned and that the bearings turn freely. Confirm the belt tensioning system moves smoothly and that all fasteners are tight. If you find a problem, correct it before installing the Stark 960-8M-10.
Match the old belt to the Stark 960-8M-10 by reading the marking on the back. The profile is HTD 8M and the pitch is 8 mm. If the marking is worn, measure the old belt and compare it with the data for this part. The same size may also be listed under other brands.
When you request a quote, send the part number 960-8M-10 and the quantity you need. If you are replacing more than one belt on the same drive, include all the part numbers so we can help you confirm the right belts or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, burrs, or debris. Verify alignment and that the bearings turn freely. Make sure the tensioning system works and all fasteners are tight.
- How do I confirm the Stark 960-8M-10 matches my old belt?
- Read the marking on the back of the old belt. The profile is HTD 8M and the pitch is 8 mm. If the marking is not clear, measure the old belt and compare it with the data for this part.
- What information do you need to quote this belt?
- Send the part number 960-8M-10 and the quantity you need. If you are replacing multiple belts on the same drive, include all the part numbers.