Timing belt Stark 800-5M-10
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 800-5M-10 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 800-5M-10 and any equivalents.
When replacing a timing belt, start by matching the marking on the old belt to the new part. The Stark 800-5M-10 is an HTD 5M timing belt with a 5 mm pitch. This page helps you confirm that this is the correct belt for your drive before you request a quote.
The 800-5M-10 is a synchronous belt with an HTD 5M profile and a 5 mm pitch. These three details—profile, pitch, and part number—are what you compare against the belt you are removing. If your old belt is marked 800-5M-10, this is the direct match. If the marking differs, note the profile and pitch from the old belt and send them with your request so we can help identify the right belt.
Timing belts are often replaced during scheduled maintenance or after a drive inspection shows wear, cracking, or missing teeth. Before ordering, check the pulleys for worn grooves or debris that could affect the new belt. Confirm that the belt width and tooth profile match the pulleys. The 800-5M-10 is a Stark belt we carry for industrial drives that use the HTD 5M profile.
To request a quote, send the part number 800-5M-10 by WhatsApp or email. If you are unsure, include the old belt's marking, the pulley tooth count, and the center distance. Our team replies promptly and can confirm the belt or suggest an equivalent based on the data you provide.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
Frequently asked questions
- How do I confirm the Stark 800-5M-10 fits my drive?
- Compare the marking on your old belt to 800-5M-10. The key details are the HTD 5M profile and the 5 mm pitch. If the old belt shows the same part number, it is the correct replacement.
- What should I send with my quote request?
- Send the part number 800-5M-10. If you are not certain, also include the old belt's marking, the number of teeth on the pulleys, and the center distance between shafts.
- Can you help if my old belt has a different number?
- Yes. Send the marking from your old belt, along with the profile and pitch if visible, and our team will help confirm the right belt or suggest an equivalent.