V-belt Stark 5V 1320
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 5V 1320 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 1320 and any equivalents.
The Stark 5V 1320 is a narrow wedge V-belt with a 5V profile and a 1320 mm length. To match it to the belt you are replacing, confirm those two markings on the old belt before you order.
Start by reading the back of the belt on the drive. You are looking for the profile and the length: 5V and 1320 mm. The profile tells you the cross-section family, and the length is the datum you compare against. If the old belt is worn or the marking is gone, measure the outside length and note the top width and thickness so we can help confirm the match.
The same size is also listed under Mitsuboshi 5V 1320, Optibelt 5V 1320 and Dayco 5V 1320. That gives you more than one source for the same profile and length when you are cross-checking a replacement. It does not change the fit: a 5V profile and 1320 mm length is what the drive expects.
When you request a quote, send the part number 5V 1320 along with the application details from the drive. If the marking on your old belt is unclear, send a photo of the belt and the pulley setup. We carry the Stark 5V 1320 and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5V
Frequently asked questions
- How do I confirm the Stark 5V 1320 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. You need to see 5V for the profile and 1320 mm for the length. If the old belt is unmarked, measure the outside length and note the cross-section so we can help confirm the match.
- What should I send with my quote request for the 5V 1320?
- Send the part number 5V 1320 and the details from the drive, such as the pulley diameters and the application. A photo of the old belt and the drive setup helps if the marking is worn or hard to read.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Mitsuboshi 5V 1320, Optibelt 5V 1320 and Dayco 5V 1320. The profile and length are the same, so you can use those listings when cross-checking a replacement.