Timing belt Stark 560-H-100
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 560-H-100 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 560-H-100 and any equivalents.
The Stark 560-H-100 is a timing belt in H profile. Before you fit it, inspect the drive so the new belt is not damaged by a worn component. The same size is also listed under Mitsuboshi 560-H-100.
Start with the sheaves. Check the grooves for wear, corrosion, nicks and embedded debris, and confirm the flanges are not bent or rubbing. A sheave that has worn out of shape will shorten the life of any new belt, whatever the part number on the back.
Check alignment and tensioning. Misalignment pulls the belt against the flange, and an over- or under-tensioned drive loads the cords. Look at the bearings and the shaft for play, and confirm the take-up has enough travel to tension the belt correctly.
Then read the marking on the old belt and match it to the replacement. The 560-H-100 carries the profile and the length; if the marking is worn away, send us what you can read and the drive details, and we will help confirm the right belt or suggest an equivalent. We carry Stark and can quote by part number.
If the drive runs more than one belt, replace the set together so the load stays even across the grooves.
Dimensions
- Profile
- H
Frequently asked questions
- How do I order the Stark 560-H-100?
- Send the part number 560-H-100 by WhatsApp or email and we will reply with a quote. If you are unsure of the belt, send the marking on the old belt and the drive details.
- What should I check before fitting this belt?
- Inspect the sheaves for groove wear, corrosion and debris, check alignment and flange condition, and confirm the bearings and take-up are in good order.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Mitsuboshi 560-H-100.