V-belt Stark 3VX 375
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and STARK: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 3VX 375 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3VX 375 and any equivalents.
The Stark 3VX 375 is a cogged narrow V-belt in the 3VX profile. Cogged narrow V-belts are commonly used on compact, high-speed industrial drives where a standard wrapped belt would run hot or slip, such as pump, fan and compressor drives. Confirm fit by matching the profile and the part number on the belt you are replacing.
The 3VX profile is a narrow cross-section, so it sits in a matching 3VX sheave groove and transmits the same load with less belt width than a classic V-belt. The cogged construction is molded with teeth on the underside, which improves flexibility around small pulleys and helps the belt run cooler on drives that see frequent starts or continuous duty. The Stark 3VX 375 is the belt to specify when the drive was built around this profile.
To confirm fit, read the marking on the back of the old belt and match the profile and the part number. Check the sheave grooves for wear, oil or debris, and check that the belt sits at the correct height in the groove. If a drive runs more than one belt, replace the full set at the same time so the load stays evenly shared.
The same size is also listed under Dayco 3VX 375. Send the part number by WhatsApp or email and our team will confirm the right belt or suggest an equivalent for your drive.
Dimensions
- Section
- 3VX
Frequently asked questions
- How do I confirm the Stark 3VX 375 fits my drive?
- Read the marking on the back of the belt you are removing and match the 3VX profile and the part number. Also check that the sheave grooves are cut for a 3VX cross-section and are free of wear and oil.
- What should I send to get a quote?
- Send the part number, Stark 3VX 375, by WhatsApp or email. If you are replacing a different belt, send that marking as well and we will confirm the match or suggest an equivalent.
- Should I replace all the belts on a multi-belt drive at once?
- Yes. On a drive that runs more than one belt, replacing the full set together keeps the load shared evenly and avoids mixing a new belt with worn ones.