V-belt Stark 3V 750
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 3V 750 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V 750 and any equivalents.
This Stark 3V 750 is a narrow wedge V-belt with a 3V profile and a length of 750 mm. It is used on industrial drives where a compact, high-capacity belt is needed, such as pumps, fans, compressors and machine tools. The same size is also listed under Mitsuboshi, Optibelt and Dayco.
To confirm fit, compare the markings on the old belt with the profile and length shown here. The 3V profile and 750 mm length are the key dimensions; if your drive uses 3V pulleys and the belt path measures 750 mm, this is the correct size. Check pulley groove condition and alignment as part of the same inspection.
When replacing a belt, inspect the full drive: worn pulleys, misalignment, and damaged or mismatched belts can shorten service life. If more than one belt runs on the drive, replace them as a set so the load is shared evenly. Keep the old belt for reference and note the profile and length before ordering.
For a quote, send the part number 3V 750, the quantity you need, and any details from the old belt marking. If you are unsure whether this is the right profile or length, include a photo of the belt and the pulley grooves so the team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- 3V
Frequently asked questions
- How do I confirm that the Stark 3V 750 fits my drive?
- Check that your pulleys are 3V profile and that the belt path length is 750 mm. The marking on the old belt should also show 3V 750. If the old belt is worn or unreadable, measure the outside length and compare it with 750 mm.
- Can I use this belt if my current belt is from another brand?
- Yes, if the profile and length match. The same size is also listed under Mitsuboshi, Optibelt and Dayco. Always confirm the profile and length before installing.
- What should I send to request a quote?
- Send the part number 3V 750 and the quantity you need. If you want help confirming the fit, include a photo of the old belt marking and the pulley grooves.