Timing belt Stark 1400-8M-10
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 1400-8M-10 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1400-8M-10 and any equivalents.
The Stark 1400-8M-10 is a timing belt in the HTD 8M profile with an 8 mm pitch. When a drive goes down, the fastest way to order the right replacement is to read the marking on the back of the old belt and send it in.
That marking is the belt's identity. On this belt it reads 1400-8M-10, and it tells you the profile, the length and the width in one line. Copy it exactly as printed, including any digits that look like part of the code, rather than measuring a worn belt that may have stretched or been replaced with the wrong size at some point.
If the printing has worn off, look at the belt itself. An HTD 8M profile has a rounded tooth form on an 8 mm pitch, which you can confirm against the tooth shape on the pulley. Note the belt width and count the teeth if you need to, then send those details along with the machine or drive it came off.
Send the belt code, a photo of the marking and the drive it runs on by WhatsApp or email. We carry the Stark 1400-8M-10 and will confirm it against your application, or help you work out the correct belt if the marking points somewhere else.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
Frequently asked questions
- Where do I find the part number on the belt?
- It is printed on the back of the belt, the side that runs against the flat idler or the outside of the drive. Read it in place with a light if you can, or turn the drive over by hand until the marking comes into view.
- What if the marking on my old belt is unreadable?
- Send a photo of the belt and the pulley it runs on. The HTD 8M tooth form and the 8 mm pitch can be checked against the pulley grooves, and the length can be confirmed from the drive layout.
- Can you confirm this belt fits my drive?
- Yes. Send the belt code, the machine or drive it runs on, and the pulley details. We will check the Stark 1400-8M-10 against your setup and reply with the correct belt.