Timing belt Stark 1224-8M-10

STARK 1224-8M-10 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1224-8M-10 and any equivalents.

The Stark 1224-8M-10 is a timing belt with an HTD 8M profile. This page is written for the maintenance technician or buyer who needs to confirm it matches the belt coming off the drive. The simplest way to verify a replacement is to read the marking on the old belt and compare it with the part number and profile here.

Start with the belt in hand. The profile is HTD 8M, and the pitch is 8 mm. The code 1224-8M-10 identifies the belt by its length and profile, so the marking on the back of the old belt should correspond. If the old belt is worn or the print is gone, measure the length along the pitch line and check the tooth profile against the 8M form before ordering.

Because this is a timing belt, tooth profile and pitch must match the pulleys. An 8M belt will not seat correctly on a pulley cut for another profile, and a belt of the wrong length will not tension properly. Confirm the width and tooth count against the drive before installing, and inspect the pulleys for wear or damage at the same time.

If the marking is unclear, send the part number, the profile and the length from the old belt. We carry the Stark 1224-8M-10 and can help confirm it is the right belt for your drive or suggest an equivalent.