SNR USFL208-24 flange bearing 2 holes

SNR USFL208-24 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for USFL208-24 and any equivalents.

The USFL is a two-bolt flange housing unit that carries an SNR insert bearing, used to support rotating shafts on flat surfaces. The housing bolts down through two holes, while the insert's extended inner ring grips the shaft. It suits equipment where space is tight and alignment needs to be simple, such as conveyors, fans, mixers and farm machinery.

Reading the code helps you order the right unit. US stands for the housing with insert, F for the two-bolt flange, and L for the light-duty mounting style. The number after the letters sets the insert size and therefore the shaft diameter. Basic sizes include USFL204 and USFL205. Suffixes such as -12, -14, -15 and -16 give the diameter in inches, as in USFL204-12, USFL205-14, USFL205-15 and USFL205-16. Larger sizes are USFL206 and USFL206-18. Send the full code and we quote that exact size.

You will find these units in food and beverage plants, grain handling, packaging lines and water treatment equipment, as well as in agricultural machinery, aggregate conveyors and industrial ventilation. The two-bolt flange fastens to sheet metal or profiles with the shaft at a right angle to the mounting plane. They are a common choice when replacing an existing flange unit of the same configuration.

Selection starts with the shaft diameter and the type of load. If axial load or misalignment is present, check the insert internal clearance and the sealing arrangement. Inserts normally come with lip seals that hold grease in and keep dust out. During mounting, set the flange flat, tighten the bolts in a cross pattern, and confirm the shaft turns without resistance. Grease reaches the bearing through the insert channel; in wet or dusty conditions, relubricate more often.

Flange units with inserts come from several brands under equivalent codes. If you have a number from another manufacturer or an unmarked part, we cross-reference it using shaft dimensions, hole spacing and flange height, since interchangeability depends on those dimensions rather than the number alone. Share the equipment details or a photo of the part and we will point you to the closest match.

When a machine is down and you need a USFL housing, send the complete code by WhatsApp. We will quote it promptly, and if the application calls for a different flange or insert setup, we will help you get the right unit mounted correctly. MR Industrial Accessories LLC supplies housings and insert bearings for many applications.