SNR EXFL209-27 flange bearing 2 holes
- Brand
- SNR
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SNR EXFL209-27 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for EXFL209-27 and any equivalents.
The EXFL from SNR is a two-bolt flange housing supplied with an insert bearing, designed to be bolted flat onto a machine frame or panel. It holds a rotating shaft in place with fixed alignment and comes lubricated for life, which keeps installation simple where space is tight.
Reading the code helps you order the right unit. EXFL identifies the two-bolt flange family with insert bearing. The number that follows tells you the size: EXFL204 and EXFL205 cover the smaller shafts, EXFL206 and EXFL207 the larger ones. When a hyphen appears, as in EXFL204-12, EXFL205-14, EXFL205-15, EXFL205-16 or EXFL206-18, the unit is an inch-bore version of that same size. Quote the full reference and you get the exact match.
You will find these units on conveyors, belt drives, mixers, fans, pumps, mills and packaging equipment. Because the two bolts let you fasten the housing straight to sheet metal or structural steel, no machining is needed on site. Typical duty includes irrigation systems, bucket elevators and farm machinery, provided the shaft turns at moderate speed and the load is mainly radial with some axial component.
Three points guide selection: the shaft diameter, how the insert locks to the shaft (set screw or eccentric collar), and the sealing arrangement. A contact lip seal holds grease in and keeps dust out. Set the flange flat against the mounting surface and tighten the bolts in a cross pattern so the housing is not distorted. The bearing arrives pre-lubricated; in damp areas or where washdowns are frequent, inspect the lip seal and add compatible grease as needed. Keep the housings aligned with each other so the insert does not run under side stress.
Other brands offer flange housings with a similar bolt layout and bore. Whether one replaces another depends on the flange dimensions, the hole spacing and the shaft diameter all matching. Bring us an unmarked part or a competitor's number and we will identify the equivalent or quote the size you actually need.
Send the EXFL reference stamped on the housing, or simply the shaft size plus the distance between the flange holes, through WhatsApp. Our team replies quickly and can suggest equivalents or help you confirm the right choice.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the number after the hyphen mean in an EXFL reference?
- It marks an inch-bore version of the same housing size. EXFL204-12 and EXFL205-14, for instance, are inch variants, while EXFL204 and EXFL205 are metric. Give us the complete reference and we will quote that exact unit.
- When should I pick an EXFL housing over another style?
- EXFL is the two-bolt flange type, meant for bolting to a flat surface. Shaft-mount and take-up designs cover other mounting situations. Shaft diameter, the room available and the direction of the load are what decide it, and we can walk you through that.
- What information do you need to quote a housing?
- Either the reference on the housing, such as EXFL205-14, or the shaft size and the hole spacing across the flange if the number is gone. With that we can quote quickly and point you to a compatible alternative when required.