SKF YAT 205-100 CW y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF YAT 205-100 CW belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for YAT 205-100 CW and any equivalents.
The SKF YAT CW series is a Y-bearing insert with a spherical outer ring and set screw locking on the inner ring. It fits into split plummer block and pillow block housings, and the spherical outer ring helps where the housing and shaft are not perfectly aligned. MR Industrial Accessories LLC supplies this line and helps buyers match the code to the shaft and the application.
Reading the code is the fastest way to order the right insert. YAT tells you the locking method: set screws on the inner ring. CW is the cage designation, a stamped steel cage intended for general duty. Take YAT 205-100 CW as an example: 205 is the size series and 100 is the shaft diameter in hundredths of an inch, so the shaft is 1 inch. Once you know the shaft size and the locking style, the rest of the code falls into place.
These inserts turn up in conveyors, belts, elevators, mills, mixers and other transmission equipment. Plants handling food, chemicals and bulk materials use them where dust or moisture is present and the sealing has to hold up. The spherical outer ring also makes mounting easier in housings that permit a small amount of misalignment.
Selection comes down to three things: shaft diameter, locking type (set screws or eccentric) and the sealing the environment demands. Fit the bearing on a clean, ground shaft and tighten the set screws with a torque wrench to the recommended value. The bearing arrives lubricated from the factory; after that, follow the maintenance plan for the equipment. Good alignment at installation helps the bearing reach its expected service life.
SKF Y-bearings interchange with other brands that follow the same dimensional standard. When replacing one, compare the complete code, not just the size: series, shaft diameter and sealing suffix all matter. Suffixes are not always equivalent, and CW is one example where the cage or seal behind the letters can differ from another maker's. Send us the original designation and we will confirm the match.
To get a quote on the SKF Y-bearing YAT CW series you need, send the full code by WhatsApp or email. We reply promptly and can suggest equivalents or help you choose. We also advise on housings, seals and the lubricants that go with them.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the CW suffix mean on an SKF Y-bearing?
- CW indicates a stamped steel cage. That cage suits general applications at moderate temperatures and normal loads. It does not change the outer dimensions or the shaft diameter.
- How do I pick the right Y-bearing for my equipment?
- Start with the shaft diameter, then the locking type, set screws or eccentric, and finally the sealing the environment calls for. With those three details we can help you land on the correct code in the YAT CW series.
- Do SKF Y-bearings interchange with other brands?
- In general, Y-bearings follow dimensional standards that allow interchange between brands. Check the full code and the sealing type, though, because small suffix differences can affect how the bearing performs.