SKF YAR 205-014-2F/W64C y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF YAR 205-014-2F/W64C belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for YAR 205-014-2F/W64C and any equivalents.
The SKF YAR series covers insert Y-bearings with an extended inner ring that locks onto the shaft with set screws. The 2F and W64C suffixes in this designation point to a specific seal and a particular grease fill. These inserts are made for fast mounting on shafts and for use in split or pillow block housings, where they handle moderate radial and axial loads and tolerate minor misalignment.
Reading the code helps you confirm what you are ordering. In YAR 205-014-2F/W64C, the YAR letters identify the bearing family: insert type, extended inner ring, set screw locking. The 205-014 segment relates to bore size and locking variant, 2F denotes a special seal, and W64C indicates a defined lubrication for specific service conditions. Checking each suffix against the application avoids surprises at installation.
You will find this type of insert in conveying equipment, grain elevators, mixers, fans and agricultural machinery, as well as in food, cement, mining and material processing operations. The extended inner ring allows a firm shaft fixing without complex machining, which keeps installation and maintenance work short. The design also absorbs small alignment errors and carries combined loads.
Sealing and lubrication drive the selection. Choose the 2F seal when the working environment calls for extra protection against contaminants and against grease loss. W64C refers to a grease intended for situations such as humidity exposure or moderate temperatures. At mounting, align shaft and housing first, then tighten the set screws evenly to the recommended torque so the inner ring is not deformed.
For replacements, other manufacturers offer Y-bearings built to the same dimensional and functional designation. Confirm bore diameter, outer diameter, width, locking method and seal type before substituting. Materials and tolerances can differ between makers, so it is worth having a specialist review the cross before you commit.
To request a quote for this SKF YAR series insert with 2F and W64C suffixes, or to get help choosing the right model, send the complete part number by WhatsApp or email. Our team can also suggest equivalents and assist with the selection.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What do the 2F and W64C suffixes indicate?
- 2F identifies a special seal that improves protection against contaminants. W64C refers to a specific grease, typically chosen for water resistance or moderate temperature service. Both matter when matching the bearing to the application.
- Can this insert fit housings from other manufacturers?
- It can, provided the housing dimensions match and the bearing agrees in outer diameter and width. Interchangeability also depends on tolerances and the locking type, so verify the measurements and ask us to confirm compatibility.
- How should I mount this bearing?
- Clean the shaft and housing and remove burrs. Seat the insert, then tighten the set screws evenly to the recommended torque. Check alignment and lubricate if needed. Careful mounting helps the bearing reach its expected service life.