SKF WSTUC 30M-TPZM y-bearing unit

SKF WSTUC 30M-TPZM belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for WSTUC 30M-TPZM and any equivalents.

A Y-housing with an SKF insert bearing arrives as one assembled unit: the housing and the bearing are already matched, so it goes onto the shaft and the structure as a single piece. It supports and guides rotating shafts where space is tight and alignment needs to be simple. MR Industrial Accessories LLC supplies this line to customers across the United States and in several Latin American countries, and can help you confirm the correct designation for your application.

Read the designation in blocks. WSTUC is the series of the Y-housing with insert bearing. The M in the middle points to how the insert locks onto the shaft, typically a set screw on the inner ring. TPZM covers the sealing and lubrication variants used in this series. The number in the middle is the shaft diameter the unit is built for, which is why WSTUC 25M-TPZM and WSTUC 30M-TPZM sit in the same family but serve different shafts. When you request a quote, send the full code exactly as it appears on the equipment or the drawing.

These units turn up in belt conveyors, bucket elevators, mixers, screens and packaging lines. In agriculture they work on seeders and harvesters; in food and beverage plants they sit on transmission shafts and rollers; in wood and ceramics they handle dusty conditions. The two-hole or flat-base mounting format makes them straightforward to install on folded sheet metal or welded structures, which is common in equipment built or repaired locally.

Selection comes down to three things: shaft diameter, the load case (radial, axial or combined) and the environment. The TPZM sealing normally uses contact seals that keep dust and moisture out, so if the equipment sees frequent washdowns, check the degree of protection. Lubrication of the insert may be permanent or relubricable depending on the design. During mounting, make sure the base sits flat and the shaft is aligned so the insert is not stressed, and tighten the fixing screws in a controlled way to keep the inner ring from turning on the shaft.

Replacement codes for Y-housings with insert bearings can differ from one maker to another, even when the main dimensions stay within the same series. Do not treat a code from another brand as automatically identical. Compare shaft diameter, hole spacing and fixing type first. We can point you to options that correspond in the brands we supply, but that is not the same as an automatic equivalence. Checking dimensions against a drawing or a sample is the safest route.

If you already have WSTUC 25M-TPZM, WSTUC 30M-TPZM or another reference from this family, send it by WhatsApp along with a photo of the housing and your shaft measurements. We will come back with the quote and help you confirm that the designation matches what you need.