SKF W 6200-2RS1/GFJ/R806 stainless steel deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Stainless steel deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF W 6200-2RS1/GFJ/R806
- W 62Series
- Stainless steel deep groove ball bearings, W 62 series. Series differ in outside diameter and width even when the bore is the same.
- 00Bore
- Bore 10 mm: by standard, 00 designates 10 mm.
- 2RS1/GFJ/R806Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
W 6200 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF W 6200-2RS1/GFJ/R806 measures 10 mm across the bore and 30 mm across the outside diameter; its width is 9 mm (10 x 30 x 9 mm).
SKF W 6200-2RS1/GFJ/R806 belongs to stainless steel deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for W 6200-2RS1/GFJ/R806 and any equivalents.
For equipment that faces moisture, washdowns or chemical exposure, the SKF stainless steel deep groove ball bearing W 6200-2RS1/GFJ/R806 is built to handle radial and axial loads while resisting oxidation. Its stainless steel construction makes it a practical choice for food, pharmaceutical and marine environments where corrosion is a concern. At MR Industrial Accessories, we supply this SKF bearing and help you match the right sealing and lubrication to your application.
The part number W 6200-2RS1/GFJ/R806 breaks down into several meaningful segments. The W at the start signals a stainless steel bearing. The 6200 number places it within the 62 series, which is the medium-section size range. The 2RS1 suffix means the bearing has double rubber seals on both sides. GFJ identifies the food-grade grease fill, and R806 is a manufacturer-specific specification. Reading these codes correctly ensures you get the exact variant for your equipment.
This bearing is common in food packaging lines, dairy processing, beverage filling equipment and pharmaceutical operations. It also appears in marine applications, industrial laundry systems and water treatment plants. Because it withstands frequent cleaning with chemical agents, it suits environments where hygiene and corrosion resistance are priorities.
When choosing a stainless steel bearing, consider the sealing method. Double rubber seals block contaminants and help retain lubricant, though they can add friction torque. The GFJ grease is intended for incidental food contact, but always confirm that local regulations allow its use in your process. During installation, align the bearing properly and avoid impacts that could harm the seals. Cleaning the shaft and housing beforehand supports longer bearing service life.
Other manufacturers offer stainless steel bearings with similar designations, but suffixes can differ. For instance, the SKF 2RS1 seal corresponds to 2RS in some other brands, and food-grade grease codes are manufacturer-specific. Before interchanging bearings, verify the critical dimensions and operating conditions. If you are unsure, send us the complete part number and we will help you find a suitable option.
To request a quote, send the full part number via WhatsApp or email. Our team replies promptly and can suggest equivalents or assist with selection. Contact MR Industrial Accessories for technical guidance on the right stainless steel bearing for your application.
Dimensions
10 x 30 x 9 mm (d x D x B): boundary dimensions for basic designation W 6200, according to ISO 15.
- Bore
- 10mm
- Outside diameter (D)
- 30mm
- Width (B)
- 9mm
Frequently asked questions
- SKF W 6200-2RS1/GFJ/R806 bearing: what are its dimensions?
- SKF W 6200-2RS1/GFJ/R806 measures 10 mm across the bore and 30 mm across the outside diameter; its width is 9 mm (10 x 30 x 9 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation W 6200.
- What does the 2RS1 suffix mean on this bearing?
- The 2RS1 suffix indicates double rubber sealing on both sides of the bearing. This protects against contaminants like dust and water and helps retain lubrication. It is well-suited for humid or particle-laden environments, though it may slightly increase friction.
- Is this bearing suitable for food contact?
- The GFJ designation refers to a food-grade grease, allowing use in applications where incidental food contact may occur. Always check local regulations and your specific process conditions to ensure compliance.
- Can I replace a stainless steel bearing with a chrome steel one?
- It is not recommended in corrosive environments. Stainless steel provides oxidation resistance that chrome steel lacks. Even if dimensions match, service life would be significantly reduced in the presence of moisture or chemicals.