SKF W 608-2RS2/VT127B stainless steel deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Stainless steel deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF W 608-2RS2/VT127B
- W 60Series
- Stainless steel deep groove ball bearings, W 60 series. Series differ in outside diameter and width even when the bore is the same.
- 8Bore
- Bore: 8 mm.
- 2RS2/VT127BSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
W 608 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF W 608-2RS2/VT127B measures 8 mm across the bore and 22 mm across the outside diameter; its width is 7 mm (8 x 22 x 7 mm).
SKF W 608-2RS2/VT127B belongs to stainless steel deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for W 608-2RS2/VT127B and any equivalents.
When moisture, washdown or chemical exposure is part of the daily routine, a standard bearing may not last. The SKF stainless steel deep groove ball bearing is built to handle radial and axial loads in these conditions, with side seals that keep contaminants out and lubricant in. MR Industrial Accessories supplies this SKF line and helps you match the right variant to your equipment.
The part number tells you what you are getting. A leading W means stainless steel. The digits that follow, such as 608, set the size and dimensional series. The 2RS suffix shows rubber seals on both sides, which block dust and splashes and hold the grease. The /VT ending identifies the factory lubricant, with a number for the specific variant. In W 608-2RS2/VT127B, the full code describes a stainless steel, sealed bearing with a particular grease. Reading these suffixes correctly lets you order an exact replacement.
You will find this type of bearing in food and beverage plants where equipment is washed often, in chemical processing pumps and agitators, in marine or coastal settings, and in medical devices, packaging machines and conveyors in humid areas. Its ability to take moderate radial and axial loads makes it a good fit for small and medium shafts.
Selection starts with the environment: if corrosive liquids are present, stainless steel is the right choice. Check the seal type. 2RS seals work well against dust and splashes, but at high speeds consider whether the added friction is acceptable. The /VT lubricant is set at the factory, so do not substitute another without checking, as it can affect corrosion resistance or operating temperature. During mounting, align the bearing properly and avoid hitting the seals. If the shaft or housing is worn, correct it before installation.
Stainless steel bearings from SKF can interchange with other brands that share the same standard dimensions, but watch the suffixes. A sealed bearing with special lubrication is not the same as an open one or one with a different grease. The W ... 2RS/VT designation shows which characteristics must match. Nomenclature for stainless steel and lubricants varies between manufacturers, so always confirm the technical data. If you need help interpreting the code, MR Industrial Accessories can assist.
To request a quote, send the complete code by WhatsApp. If you do not have it, provide the shaft and housing dimensions, the load type and the environmental conditions, and we will advise you. We supply SKF and can offer the variant that suits your equipment. Write to us and we will reply promptly.
Dimensions
8 x 22 x 7 mm (d x D x B): boundary dimensions for basic designation W 608, according to ISO 15.
- Bore
- 8mm
- Outside diameter (D)
- 22mm
- Width (B)
- 7mm
Frequently asked questions
- SKF W 608-2RS2/VT127B bearing: what are its dimensions?
- SKF W 608-2RS2/VT127B measures 8 mm across the bore and 22 mm across the outside diameter; its width is 7 mm (8 x 22 x 7 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation W 608.
- What does the 2RS suffix mean on an SKF bearing?
- The 2RS suffix means the bearing has rubber seals on both sides. These seals keep out dust, water and other contaminants and retain the lubricant. They suit humid or dirty environments, though they may add some friction compared to an open bearing.
- Can I replace a stainless steel bearing with a chrome steel one?
- It is not recommended in corrosive environments. Chrome steel oxidizes with moisture or chemicals, while stainless steel resists better. If the equipment is not exposed to corrosion, a standard bearing may work, but check the permissible loads and speeds, which can differ between materials.
- How do I request a quote for this bearing at MR?
- Send the complete code by WhatsApp, for example W 608-2RS2/VT127B. If you do not have it, provide the shaft and housing dimensions, the load type and the working conditions. With that data we will quote the right SKF variant and advise you on mounting.