SKF TLSD 250/FG2 automatic lubricator

SKF TLSD 250/FG2 belongs to automatic lubricator, part of our Greases and lubrication range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TLSD 250/FG2 and any equivalents.

The SKF SYSTEM 24 TLSD is a single-point automatic lubricator that feeds grease to one lubrication point in a continuous, controlled way. It is an electromechanical unit that mounts right at the bearing or guide it serves, so the routine of manual greasing is no longer needed. Because it is self-contained and compact, it fits points that are hard to reach or where the amount of grease applied should stay consistent. It belongs to the SKF automatic lubrication range that we supply.

Reading the code tells you what you are holding. Take TLSD 125/FG2: the number 125 refers to a 125 ml cartridge, and FG2 identifies the grease formulation. TLSD 250/FG2 is the same grease in a 250 ml cartridge. The FG letters mark the compatible grease family, while the digit after them separates one formulation from another. Parts such as the CAP cover and the BAT battery are not included with every model and are ordered on their own. The full code printed on the unit or on the cartridge label is what we need for a quote.

Plants in food processing, cement, mining, paper and water treatment rely on this type of lubricator, and it is a common sight on motors, pumps, fans, conveyors and process machinery where manual greasing tends to be skipped or overdone. Since each unit serves a single point, a machine with several lubrication points needs one lubricator per point. The sealed, self-contained format keeps the maintenance routine simple and lowers the chance of a point running dry or receiving too much grease.

Choosing a model comes down to three things: the grease the bearing or guide requires, the cartridge volume that matches estimated consumption, and the conditions where the unit will work. The TLSD series lets you set the discharge interval, but the grease inside the cartridge always has to be compatible with what is already in the point being lubricated. When mounting, check that the connection thread is clean and tightened properly, that the battery sits correctly, and that the lubricator is aligned with the application point, since alignment affects how evenly the grease is dispensed.

Automatic lubricators from other manufacturers do a comparable job, yet cartridges and accessories from one brand do not fit another. The SKF SYSTEM 24 TLSD has its own thread and geometry, so the practical route is to replace the whole unit or use spare parts made for it. If you are swapping out a lubricator already in service, note the cartridge code and the connection thread first. With those two details we can point you to the right option within the SKF line.

Send the lubricator or cartridge code by WhatsApp or email and we will prepare your quote. If you do not have a code yet, tell us the equipment, the point to be lubricated and the grease you use, and we will help you work out which TLSD model fits. We supply the SKF automatic lubrication line to customers across the United States and in several Latin American countries, and we can suggest equivalents when a direct match is not available.