SKF SYWK 30 YTH y-bearing unit

SKF SYWK 30 YTH belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYWK 30 YTH and any equivalents.

The SKF SYWK YTH is a ready-to-mount unit that pairs a plummer block housing with an insert bearing secured by set screws. It supports rotating shafts on fixed structures, particularly where space is limited and installation needs to be straightforward. MR Industrial Accessories supplies this series within its bearing housing offering and provides technical guidance to match the unit to your shaft diameter and operating conditions.

The part number breaks down into three parts. SYWK denotes the plummer block housing series that takes an insert bearing with set screw locking. The number that follows is the shaft size, given in inches or millimeters depending on the variant. For instance, SYWK 1. YTH fits a 1 inch shaft, while SYWK 20 YTH, SYWK 25 YTH, SYWK 30 YTH, SYWK 35 YTH and SYWK 40 YTH correspond to 20, 25, 30, 35 and 40 mm shafts. The YTH suffix identifies the insert and seal configuration. Use the letters to recognize the series, then confirm the exact size you require.

Typical applications include belt conveyors, bucket elevators, mixers, mills, conveyor belts and process equipment in food, chemical, cement and aggregate operations. The plummer block design mounts on steel or concrete with two bolts, which simplifies initial alignment and replacement. The YTH insert seal offers protection against dust and moisture. In environments with frequent washdowns or chemical exposure, consider additional sealing measures.

Selection depends on shaft diameter, expected radial and axial loads, and ambient conditions. Mount the housing on a flat, rigid surface and tighten the fastening screws to the recommended torque. Most inserts come pre-lubricated for life, though severe duty may call for periodic relubrication. Always check shaft alignment with the housing to prevent parasitic loads.

For equivalents, SYWK YTH units can be interchanged with other brands that share the same dimensional standard, such as the SKF SY series or comparable products from NSK, NTN or FAG, as long as shaft diameter, base height and hole spacing align. Nomenclature varies between manufacturers, so comparing actual housing and insert dimensions is essential before substitution. MR Industrial Accessories can assist in identifying a suitable equivalent.

To request a quote, send the complete part number and quantity via WhatsApp or email. We also quote the insert separately if your housing remains in good condition. Our team responds promptly and can suggest alternatives to help you avoid downtime.