SKF SYT 50 L y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SYT 50 L belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYT 50 L and any equivalents.
The SKF SYT L is a ready-to-mount assembly that pairs a cast iron housing with an insert ball bearing. It supports rotating shafts in machinery that needs a compact, easily aligned solution. MR Industrial Accessories supplies this line and can help you match the right size to your shaft.
The code breaks down simply: SYT marks the Y-bearing unit series, the number is the shaft diameter in millimeters, and the trailing L is a construction variant. So a SYT 40 L fits a 40 mm shaft, a SYT 50 L fits 50 mm, and a SYT 70 L fits 70 mm. That pattern lets you identify the size directly from the part number.
You will see these units on belt conveyors, bucket elevators, mixers, mills, packaging lines, and other power transmission drives. They also show up in food, cement, mining, paper, and agricultural operations where dust, moisture, or washdowns are common. The cast iron housing and sealed insert are built for those conditions.
When choosing a unit, confirm the shaft diameter, whether the load is radial, axial, or combined, and what the environment demands. The insert seal determines contaminant protection, so pick a labyrinth or lip seal based on dirt and moisture levels. During installation, mount on a flat, rigid surface, torque the bolts to spec, and check shaft alignment to avoid extra loads. Correct lubrication and internal clearance help the unit last.
Interchangeability across brands is possible because Y-bearing units with insert bearings often share standard dimensions. However, sealing, insert tolerance, and housing material can differ. Compare critical dimensions and operating conditions before substituting. Our technical team can review the details with you.
To get a quote, send the complete part number—such as SYT 40 L—by WhatsApp or email. We reply promptly and can suggest equivalents or help you select the right unit for your equipment.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does SYT mean in this unit?
- SYT indicates the series of Y-bearing units with insert bearing. The number that follows is the shaft diameter in millimeters, and the final L is a construction variant. For example, SYT 50 L is for a 50 mm shaft.
- How do I choose between standard and reinforced sealing?
- It depends on the environment: if there is dust, water, or frequent washdowns, a more robust seal is advisable. For clean environments and moderate load, standard sealing is usually sufficient. Ask us with the data from your application.
- Are SKF SYT L units interchangeable with other brands?
- They may be dimensionally compatible, but always check the mounting dimensions, the type of sealing, and the insert tolerance. Not all brands keep exactly the same dimensions. Send us the part number and we will advise you.