SKF SYR 2.15/16 NH y-bearing unit

SKF SYR 2.15/16 NH belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYR 2.15/16 NH and any equivalents.

The SKF SYR NH housing with insert bearing is a pre-assembled unit that pairs a cast iron housing with a ball insert bearing, already mounted and lubricated. It supports rotating shafts in equipment that needs a compact, self-aligning solution with effective sealing. You will find it on conveyors, fans, mixers, and agricultural or process machinery.

The SYR NH code breaks down into three parts: SYR denotes the housing with insert bearing category, NH indicates a construction variant with specific lubrication and sealing, and the number in the middle gives the shaft size in inches. That number is critical when requesting a quote because it sets both the insert bore and the housing size.

In US plants and throughout Latin America, these units are common on belt conveyors, bucket elevators, mixers, dryers, centrifugal fans, and milling equipment. They also appear in agricultural operations, food processing, and packaging lines. The main advantage is that they arrive assembled, so the bearing does not need to be mounted into the housing, which cuts installation time and reduces assembly errors.

For selection, start with the shaft diameter and the type of load. The SYR NH series is built for inch shafts and moderate loads. Confirm that the housing sealing suits the environment: in dusty, wet, or washdown conditions, a more closed protection is recommended. The insert is lubricated for life at the factory, but during service it is wise to check the seal condition and operating temperature.

Mounting is straightforward: bolt the housing to the structure and secure the shaft with the set screws on the inner ring. Proper alignment of the base is important to avoid side loading on the insert. The self-aligning feature absorbs small misalignments, but it does not replace a level mounting surface. If vibration or heat appears, check alignment and set screw tightness.

Interchange between brands is based on shaft size and housing type, not on the exact part number. A SYR NH can be replaced by units from other manufacturers with the same size and configuration, but always verify housing dimensions, hole spacing, and sealing type. Send the full part number via WhatsApp or email to MR Industrial Accessories, and we will confirm the corresponding reference and suggest equivalents if needed.