SKF SYNT 75 FTS y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SYNT 75 FTS belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYNT 75 FTS and any equivalents.
The SYNT FTS is a pre-assembled unit that pairs a cast iron housing with an SKF insert bearing. It supports rotating shafts in conveyors, process machinery, and similar equipment where a sealed, easy-to-install bearing is needed. MR Industrial Accessories LLC supplies this SKF series.
The part number breaks down into two segments: SYNT designates the housing style, and FTS identifies a specific sealing and mounting variation. For example, SYNT 50 FTS, SYNT 65 FTS, SYNT 75 FTS, and SYNT 100 FTS differ by the shaft size indicated in the code. To select the correct unit, match the shaft diameter and operating loads, then verify dimensions against the SKF documentation.
These units are found in belt conveyors, bucket elevators, mixers, mills, and other processing equipment across food, chemical, cement, and aggregate plants. The cast iron housing and sealed insert withstand dust, moisture, and routine washdowns. They mount on steel or concrete structures and require proper alignment during installation.
For selection, evaluate radial and axial loads, speed, and environmental conditions. In dusty or wet settings, additional sealing protection may be needed. The base must be well supported and aligned with the shaft; misalignment shortens bearing life. Insert lubrication is typically permanent, but severe applications may call for relubrication. Follow SKF torque specifications for the mounting bolts.
When considering replacements from other brands, compare key dimensions: shaft diameter, bolt-hole spacing, center height, and mounting type. A similar part number is not enough—check the mounting drawing and load capacity. Always validate interchangeability with actual measurements before swapping a unit.
To replace a SYNT FTS housing or outfit new equipment, send the full part number to MR Industrial Accessories LLC via WhatsApp or email. We will provide a quote and help you choose the right variant for your application. Ask about special sizes or multi-unit orders.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does SYNT FTS mean on an SKF housing?
- SYNT identifies the housing category, and FTS indicates a specific sealing and mounting variant. The number in the middle, as in SYNT 50 FTS, corresponds to the shaft size. Consult the SKF product page or contact us with the part number for exact dimensions.
- How do I choose the correct SYNT FTS housing for my equipment?
- You need the shaft diameter, radial and axial loads, speed, and operating environment. These factors determine the size and sealing type. If you have the original part number, send it to us and we will help find the equivalent unit.
- Can SKF SYNT FTS housings be replaced by another brand?
- Yes, if the mounting dimensions match: shaft diameter, bolt-hole spacing, center height, and mounting type. Do not rely on part number alone; compare actual measurements. MR can assist in validating interchangeability before purchase.