SKF SYKC 507 N y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SYKC 507 N belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYKC 507 N and any equivalents.
The SKF SYKC N is a housed bearing unit that pairs a cast iron housing with an insert bearing locked by set screws. It is designed for rotating shafts where mounting is straightforward and initial alignment is simple. This makes it a practical choice for light and medium-duty equipment, and MR Industrial Accessories LLC supplies it as part of its bearing housing range.
Reading the code helps you order the right unit. SYKC denotes the housing series with an insert bearing and set screw locking, while the final N indicates a design variation within that series. The number that follows, as in SYKC 506 N, SYKC 507 N or SYKC 508 N, ties to the shaft diameter and insert size. Larger numbers correspond to larger accepted shaft diameters and higher load capacity. Always begin with the shaft diameter and then confirm the locking method.
These units are used in many industries across the United States and Latin America. They appear on belt conveyors, mixers, fans, centrifugal pumps, mills and process equipment. In food processing, frequent washdowns favor components that come apart easily, and in aggregate or cement plants, dusty conditions are common. In each case, the insert bearing can be replaced without dismantling the entire shaft, which simplifies maintenance.
Selection depends on shaft diameter, expected radial and axial loads, and the operating environment. The insert seal matters: in dusty or wet areas, extra protection is worth considering. Lubrication is applied at the factory, but it should be checked periodically in service. During mounting, keep the support surface clean and flat, and tighten the set screws with the correct wrench to avoid deforming the inner ring. Careful alignment helps extend the life of the assembly.
Interchangeability with other brands is based on critical dimensions, not on similar codes. Compare shaft diameter, distance between mounting holes and height to center. If those match, a housing from another manufacturer may be suitable. For replacement, the safest approach is to send the code stamped on the part or the main dimensions.
MR Industrial Accessories LLC supplies SKF SYKC N housings and can help you find a suitable replacement. If you have the housing code, send it via WhatsApp or email for a quote. If you do not have it, send a photo or the shaft and mounting hole dimensions, and we will help you identify it.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does SYKC N mean in an SKF housing?
- SYKC identifies the series of housings with an insert bearing and set screw locking. The final N indicates a design variant. The number that follows, as in SYKC 506 N, encodes the shaft diameter and insert size. Start from the shaft diameter to choose correctly.
- How can I tell if an SYKC N housing is interchangeable with another brand?
- Interchangeability depends on critical dimensions: shaft diameter, distance between mounting holes and height to center. If those match, another brand may work. Always verify with the actual dimensions of the part.
- What should I check when mounting a housing with an insert bearing?
- Make sure the support surface is clean and flat. Tighten the set screws with the correct wrench to avoid deforming the inner ring. Check shaft alignment and inspect lubrication periodically. In dusty or humid environments, consider additional sealing.