SKF SYFL 30 TH y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SYFL 30 TH belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYFL 30 TH and any equivalents.
The SKF SYFL TH Y-bearing housing with insert bearing is a ready-to-mount unit that supports rotating shafts. It combines a flanged housing with a Y-bearing insert, allowing simple alignment and quick installation on metal structures or masonry.
The part number breaks down as follows: SY indicates the Y-bearing housing family, F denotes the flange shape with mounting holes, and L refers to a lightweight or lower-height variant. The TH suffix identifies a specific insert execution, often related to sealing or housing material. In examples like SYFL 20 TH, SYFL 30 TH, and SYFL 35 TH, the middle number gives the shaft diameter in millimeters.
These units are found in belt conveyors, bucket elevators, mixers, fans, and packaging lines. They suit humid or dusty environments such as food plants, cement works, tanneries, and agricultural facilities. The three-bolt flange simplifies mounting on folded sheet metal or profiles, and the insert bearing tolerates slight misalignment.
When selecting, match the shaft diameter to the series number and verify that the insert's load capacity fits the application. Choose the insert seal based on contamination: for water or fine particles, a seal with an additional lip is advisable. During mounting, ensure the flange sits flat and tighten bolts in a cross pattern. Lubrication is usually permanent, but severe conditions may require replenishment.
Y-bearing housings with insert bearings from different brands are often interchangeable if flange dimensions, shaft diameter, and mounting type match. However, equivalent lines may differ in sealing or housing material, so compare the complete designation before replacing. Suffixes can vary between brands, and one letter may change the seal type or working temperature.
To replace a Y-bearing housing or assemble new equipment, send the full part number via WhatsApp to MR Industrial Accessories. With the part number and a photo of the assembly, the technical team can guide you on the right variant and alternatives in the SKF line we supply.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the TH suffix mean in the SYFL housing?
- The TH suffix identifies a particular insert execution within the SYFL series, possibly related to sealing or housing material. For a part number like SYFL 20 TH, contact us via WhatsApp with the complete designation to confirm the exact characteristic.
- How do I choose the right shaft diameter for this housing?
- The number in the designation, such as 20, 30, or 35, indicates the shaft diameter in millimeters. Measure your shaft with a caliper before ordering. If unsure, send us the part number and the measurement.
- Can it be mounted in any position?
- The three-bolt flange allows various orientations, but the ideal position depends on load and lubrication access. Typically, the insert aligns with the shaft and the flange rests flat. Consult the mounting drawing for critical applications.