SKF SYE 2.7/16 NH y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SYE 2.7/16 NH belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYE 2.7/16 NH and any equivalents.
The SYE NH from SKF is a ready-to-mount assembly that pairs a cast iron housing with an insert bearing locked by set screws. It supports rotating shafts in conveying and power transmission equipment where a compact, self-aligning unit is needed. MR Industrial Accessories supplies this SKF line with technical guidance to match the right configuration to your application.
In the SYE NH designation, SYE identifies the pillow block housing with insert bearing, while NH marks a construction variant within that series. The code also carries the shaft size in inches: SYE 2.7/16 NH fits a 2.7/16" shaft. Always confirm the shaft dimension against the manufacturer's tables before ordering.
Typical installations include conveyor belts, bucket elevators, mixers, fans and machine tools across food, chemical, mining and logistics operations. The housing can be bolted to metal structures or concrete bases, and the shaft can be removed or installed without dismantling the full assembly. These units handle dusty, humid environments and moderate loads.
Selection depends on shaft diameter, load direction (radial, axial or combined), rotation speed and site conditions. Check the sealing arrangement: insert bearings commonly use lip seals to keep lubricant in and contaminants out. Most inserts arrive pre-lubricated and allow relubrication. Proper alignment between pillow blocks prevents added stress, and the set screws must be tightened according to the manufacturer's instructions.
For replacements, SKF SYE NH pillow blocks can be interchanged with units from other makers that share similar dimensions and capacities, but verify the critical dimensions first: shaft diameter, mounting hole spacing, height to center and locking method. Suffixes do not always carry the same meaning across brands, so confirm with a specialist before substituting a component. MR Industrial Accessories can provide the technical information you need.
To replace an SYE NH pillow block or specify one for new equipment, send the complete code by WhatsApp. The MR team helps identify the correct part, answers technical questions and can suggest equivalents. Request a quote and receive personalized assistance.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the NH suffix mean in the SYE code?
- NH indicates a construction variant within the SYE series, which may relate to sealing, housing material or a mounting feature. Send us the complete code and we will clarify what distinguishes your unit.
- Is this pillow block suitable for 2.7/16 inch shafts?
- The example SYE 2.7/16 NH corresponds to a 2.7/16 inch shaft, but the series covers several sizes. Verify your shaft diameter and the exact code. If unsure, send us the measurement and we will confirm the reference.
- How are these pillow blocks with insert bearing lubricated?
- Most insert bearings come pre-lubricated from the factory and include a relubrication channel. Follow the manufacturer's recommendations for grease type and frequency based on your operating conditions.