SKF SYE 1.15/16 H y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SYE 1.15/16 H belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYE 1.15/16 H and any equivalents.
An SKF SYE H unit arrives already put together: a pillow block housing carrying a Y-bearing insert, ready to support a rotating shaft on a fixed frame. Lubrication is built in, and the insert takes care of minor misalignment during installation. It fits light and medium-duty transmission work on industrial machinery.
Reading the code tells you most of what you need. SYE points to an SKF Y-line pillow block housing supplied with a set-screw insert. The figure after it is the shaft size in inches, written as a fraction, which is how you get SYE 1.7/16 H, SYE 2 H or SYE 2.15/16 H. The trailing H means the insert bore is cylindrical and slides onto the shaft.
You will find these units on belt conveyors, bucket elevators, mixers, fans, packaging lines and drive trains in food, chemical and materials processing. The pillow block shape bolts down easily to steelwork or a concrete pad, and the self-aligning insert keeps installation straightforward.
Before ordering, confirm the shaft diameter and the locking style your equipment calls for. A set-screw insert needs a ground shaft held within the right tolerance. Grease is charged at the factory, though it pays to inspect the seal and note the running temperature. Line the housings up with each other so the bearing does not pick up axial load and wear early, and mount following SKF's instructions.
SKF SYE H housings swap with other makes that share the same designation and standard dimensions. On a replacement, check shaft diameter, housing height and the spacing between the mounting holes. If you want an alternative, MR Industrial Accessories LLC can point you to a suitable equivalent, but confirm the insert uses the same locking method and seal.
Send the full part number, for example SYE 1.15/16 H or SYE 2.3/16 H, over WhatsApp or email and our team will come back with a quote and help you settle on the right size.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the H at the end of SYE H tell me?
- It confirms the insert bearing has a cylindrical bore that fits straight onto the shaft, using set-screw locking. That detail matters when you match the unit to your mounting and shaft size.
- How do I work out which shaft diameter I need?
- Take a caliper reading of the shaft and compare it with the code. SYE 1.7/16 H, for instance, is built for a shaft of 1 inch and 7/16. Send us the measurement if anything is unclear.
- Will housings from other brands fit in place of these?
- Other brands built to the same dimensional standards can be used as replacements. Check the shaft diameter, the housing height and the hole spacing before you install one.