SKF SYD 2.11/16 TF/P54VZ172 y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SYD 2.11/16 TF/P54VZ172 belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYD 2.11/16 TF/P54VZ172 and any equivalents.
This SKF unit pairs a split cast iron housing with a ball insert bearing, supplied assembled and ready to mount on a drive shaft. It supports rotating shafts in equipment that needs alignment and protection from contaminants. MR Industrial Accessories supplies this line and can help you match the variant to your shaft diameter and fixing method.
The SYD prefix marks the split housing with insert bearing family. The figure after it, such as 2.11/16 in SYD 2.11/16 TF/P54VZ172, is the shaft diameter in inches and fractions. TF and VZ cover how the insert locks onto the shaft and the sealing or tolerance options. P54VZ172 pins down the exact housing and insert build. Reading the code this way lets you order a replacement that fits without guesswork.
Typical applications include belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and materials plants. In the oilseed, meatpacking and mining sectors, shafts need solid support and protection from the weather. The cast iron housing and the sealed insert keep dust and moisture out, which helps service life in tough conditions.
When selecting, confirm the shaft diameter, the fixing style (set screw, eccentric or taper) and the sealing level the contamination calls for. During mounting, align the housings, tighten the insert fixing screws in the correct sequence and lubricate as the manufacturer specifies. Misalignment or over-tightening shortens bearing life. MR Industrial Accessories can walk you through these points.
SKF housings interchange with other brands that share the same standardized dimensions, though seal materials or fixing systems can differ. At replacement time, compare the overall height and the hole spacing as well as the shaft diameter, and check the insert type. If anything is unclear, send the full code stamped on the housing or insert and we will confirm the equivalent.
To request a quote for the SYD housing with SKF insert bearing, send the complete code to MR Industrial Accessories by WhatsApp or email. If you do not have it, share the shaft dimensions and a photo of the assembly and we will help identify it.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the code SYD 2.11/16 TF/P54VZ172 mean?
- SYD is a split housing with insert bearing. The 2.11/16 is the shaft diameter in inches. TF and VZ indicate the fixing and sealing type. P54VZ172 identifies the exact housing and insert configuration. Send the full code to request a quote for the right variant.
- How do I choose between a SYD housing and another type of housing?
- The SYD fits when you need a split housing with insert bearing that mounts and dismounts without pulling the shaft. Look at the shaft diameter, the loads and the environment. If space is tight or loads are high, another design may suit better. Ask us and we will guide you.
- Are SKF housings compatible with those of other brands?
- Housings built to the same dimensional standards are generally interchangeable between brands. Check height, hole spacing and insert type. Seals or materials can differ and affect performance. Send us the code and we will confirm the equivalence.