SKF SY 35 TF/W64 y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SY 35 TF/W64 belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SY 35 TF/W64 and any equivalents.
The SKF Y-bearing unit with insert bearing arrives pre-assembled, pairing a housing with a ball insert bearing so it can be mounted directly onto shafts and structures. It guides and supports rotating shafts in transmission, conveying and process equipment, which simplifies both assembly and maintenance. MR Industrial Accessories LLC supplies this line and provides technical guidance to match the unit to your application.
The code SY 35 TF/W64 breaks down as follows: SY denotes the Y-bearing unit family; the number 35 is the shaft diameter the insert bearing is made for; TF indicates how the insert locks to the shaft, typically with set screws; and W64 is a sealing or extra-protection variant. Reading the designation this way lets you confirm the main characteristics at a glance.
Typical installations include conveyors, belts, elevators, mixers, fans and process lines in food, chemical, cement and materials handling operations. Plants, warehouses and agricultural equipment rely on these units where a sturdy assembly with straightforward maintenance is needed. They can be bolted to metal structures or masonry, which helps with initial alignment and with replacing the insert later.
Selection depends on shaft diameter, load type and operating environment. In dusty or damp conditions, the W64 seal or other variants are worth considering for added protection. During mounting, check alignment between units and avoid striking the insert; tighten the set screws to the recommended torque and lubricate only if the insert calls for it. Proper leveling cuts vibration and supports service life.
Y-bearing units with insert bearings are interchangeable among manufacturers that use the same standardized dimensions, though housing materials, sealing type and locking method can differ. When replacing a unit, compare shaft diameter, housing height and mounting hole positions. If anything is unclear, send the full part number and we will help identify a suitable equivalent.
To request a quote for the SKF Y-bearing unit you need, send the complete part number by WhatsApp or email to MR Industrial Accessories LLC. We will help you confirm the right variant for your equipment and reply promptly with a quote.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the W64 suffix mean on an SKF unit?
- W64 indicates a sealing or additional protection variant of the insert bearing, intended for dusty or moist environments. It does not alter the main dimensions of the unit, but it improves resistance to contamination. Let us know if your application needs this protection.
- How do I choose the correct diameter for my shaft?
- The number following SY in the designation gives the shaft diameter in millimeters. Measure the actual shaft with a caliper and compare it to the designation. If the shaft is worn, consider repair or an insert with a larger fit. We can help you confirm the measurement.
- Are SKF units interchangeable with other brands?
- Y-bearing units with insert bearings generally follow standardized dimensions, so they can be interchanged among brands that meet those standards. It is still wise to compare height, hole spacing and locking type. Send us the part number and we will advise on the equivalent.