SKF SRV.20207 KTN9/C3 spherical roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SRV.20207 KTN9/C3 belongs to spherical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SRV.20207 KTN9/C3 and any equivalents.
When shaft deflection or mounting inaccuracies are present, spherical roller bearings are often the solution. The SKF SRV.20207 KTN9/C3 is a double-row bearing with a spherical raceway that accommodates angular misalignment while carrying high radial loads. MR Industrial Accessories supplies this bearing and can help you confirm the correct part number for your application.
Reading the designation helps avoid mistakes. The prefix SRV denotes the series. The basic number 20207 breaks down as follows: diameter series 2, width series 0 and bore code 07. The KTN9 suffix points to a polyamide cage with a special treatment and a tapered bore. The C3 suffix after the slash means the internal radial clearance is greater than normal, which is useful when fits are tight or temperature differences exist across the bearing.
Typical installations include belt conveyors, mills, crushers, vibrating screens, industrial fans and paper machines. The self-aligning feature is valuable when the shaft bends or the housing lacks rigidity. You will also find these bearings in gearboxes and speed reducers that handle varying loads.
For proper selection, consider radial and axial loads, speed and lubrication method. Sealing matters: in dusty or damp areas, choose sealed variants. C3 clearance is advisable for interference fits or when operating temperatures exceed 100 °C. Even though misalignment is tolerated, take care during initial alignment. Apply grease or oil as specified and verify clearance after mounting.
Interchangeability between brands is possible if main dimensions, cage type and internal clearance are identical. The bore number alone is insufficient; tolerances and suffixes must be compared. SKF, FAG, NSK, NTN and Timken each have their own designations for equivalent lines. Always refer to the original equipment technical data. MR Industrial Accessories can assist in finding a suitable replacement.
To request a quote or check interchangeability, send the full part number via WhatsApp or email to MR Industrial Accessories. The team responds promptly and can suggest equivalents or help you choose the right bearing.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the C3 suffix mean on an SKF bearing?
- C3 indicates an internal radial clearance greater than normal. It is specified when interference fits, high temperatures or misalignment could otherwise reduce clearance and lead to overheating.
- Can this bearing handle misaligned shafts?
- Yes. Spherical roller bearings permit angular misalignment between shaft and housing. This self-aligning ability lowers induced forces and helps extend service life in equipment with shaft deflection or imperfect mounting.
- How do I get a quote for an SKF bearing?
- Send the complete part number to MR Industrial Accessories via WhatsApp or email. With that information the team can identify the product and provide a quote. If the part number is not available, send a photo or the main dimensions.