SKF SOFN 536 BF sONL split plummer block housing
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- SONL split plummer block housing
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SOFN 536 BF belongs to sONL split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SOFN 536 BF and any equivalents.
The SKF SOFN BF is a two-piece plummer block housing that supports a bearing on a transmission shaft. Because it separates into halves, the bearing can be serviced or replaced without pulling the shaft out of the assembly. This makes it a practical choice where space around the equipment is tight and the support has to stay rigid.
Reading the code helps you match the housing to the job. SOFN is the SKF series for this split plummer block housing, the number after it sets the size and the load the unit can carry, and the BF suffix marks a version with its own fixing and sealing arrangement. Codes within the line keep the same split construction but change in dimensions and in where they fit, so comparing the full designation is what tells you whether a housing suits a given shaft.
Typical installations include conveyors, mixers, mills and pumps in food processing, cement, mining and material handling. The split body means the bearing can be changed with the shaft left in place, which shortens shutdown work. MR Industrial Accessories LLC supplies this line to customers throughout the United States and in Latin America, and can help work out the right housing for the application.
Selection comes down to shaft diameter, radial and axial load, and the conditions around the equipment. The seal has to match what is present: dust, moisture or chemical exposure. Correct lubrication and careful alignment of the two halves prevent early wear. Before mounting, confirm the support surfaces are clean and tighten the screws to the torque specified for the unit.
Housings in the SKF SOFN BF series can be swapped with other manufacturers' products built to the same standard dimensions. Even so, check tolerances and the fixing method before substituting one make for another, and compare the critical dimensions rather than the designation alone, since codes differ between suppliers. Send the exact code by WhatsApp or email and the team will reply promptly, suggest equivalents and help you choose.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How is the SOFN BF designation broken down?
- SOFN is the SKF series for the split plummer block housing. The number that follows gives the size and load capacity, and BF identifies a variant with particular fixing and sealing features. Codes in the line share the split design but differ in dimensions.
- Where is a split plummer block housing like this one used?
- It fits conveyors, mixers, mills and pumps, mainly in food, cement, mining and material handling operations. Splitting the housing lets the bearing be replaced without taking the shaft apart, which cuts downtime.
- What should I check before ordering an SOFN BF housing?
- Look at shaft diameter, radial and axial loads, and the surrounding environment. Pick the seal to suit dust, moisture or chemicals, and plan for proper lubrication and alignment. Share your application details via WhatsApp or email for a precise recommendation.