SKF SNL 511-609 K7 split plummer block housing
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- SNL split plummer block housing
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SNL 511-609 K7 belongs to split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SNL 511-609 K7 and any equivalents.
The SKF SNL is a two-piece housing for mounting bearings on rotating shafts. Because it separates, you can service the bearing without pulling the shaft out, which saves time on conveyors, fans, mixers and other driven equipment. MR supplies this line and assists with selection.
Reading the code helps you order correctly. In SNL 212 K7, the 212 is the housing size and K7 identifies the seal and locking arrangement. SNL 509 K7 uses a smaller size, 509, for reduced shaft diameters, while the series itself spans many sizes and configurations. Suffixes such as K7 or K8 tell you how the housing seals and how the bearing is held, so they matter when the environment is dusty or wet.
Typical installations include belt conveyors, bucket elevators, mixers, mills and industrial fans. These units handle moderate radial and axial loads, which makes them useful across food and bottling plants, metallurgical operations, cement production and material handling. The split construction also helps where access around the equipment is tight.
When choosing a housing, start with the shaft diameter and the bearing you plan to fit, usually a deep groove ball bearing or a cylindrical roller bearing. Then look at the surroundings: the K7 suffix normally brings lip seals that keep out dust and moisture. Lubrication should match the speed and load of the application, and careful alignment at assembly avoids unnecessary stress on the bearing.
Interchange is possible with housings from other makers that share the same dimensional standard, but confirm the mounting dimensions and the bearing type before substituting. MR can review interchangeability with you, and it is always worth verifying the exact part number and specifications before replacing a component.
To request a quote, send the part number by WhatsApp or email. The team replies promptly and can suggest equivalents or help you identify the correct reference for your equipment.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the K7 suffix mean on an SNL housing?
- It defines the sealing and fixing variant. K7 typically includes lip seals for protection against contaminants, so check the exact specification for your application.
- Can any bearing be mounted in an SNL housing?
- No. SNL housings accept specific bearings, such as deep groove ball bearings or cylindrical roller bearings of the matching series. Verify compatibility before mounting.
- How do I choose the right SNL housing size?
- Base the size on the shaft diameter and the bearing you will use. The numeric code, such as 212 or 509, indicates the size. Our team can help confirm the correct choice.